Latest revision as of 00:40, 14 November 2016

This page explain how to use Iridium satellite constellation for short burst data messages with a rockblock device.
You'll need to pay for the monthly fee (6 £) and buy credits to use this how to.
All text with these recipes will transfer without crypto. If you need crypto or a web interface, try Sat Messenger / RBS

Software

See the hardware part to setup serial communication.
Get serial communication software like coolterm or picocom.
Depending on your computer select the right serial port like : /dev/ttyUSB0, /dev/tty.usbserial (type ls /dev/ in a terminal)
Setup 19200 baud and default 0D 0A line feed is fine. (Official Rock7 documentation is wrong !!)
Repository for python style : here

You need to type "AT Commands" and the rockblock will answer like all modems. You can start with AT The modem will answer : OK

Send a message

AT&K0
AT+SBDWT=Hello
AT+SBDIX

Get Signal get 0-5 (rssi)

AT+CSQ

Get IMEI

AT+GSN

Request system time

AT-MSSTM

answer is like : MSSTM: 2fbb7248

Manufacturer Identification

AT+GMI ou AT+CGMI

Model Identification

AT+GMM

Revision

AT+GMR ou AT+CGMR

Geolocation Information

AT-MSGEO
Answer is like -MSGEO: 4208,168,4772,2fa14b4d

Registration status

AT+SBREG

Initiate registration status

AT+SBDREG?

0 Detached 1 Not registered 2 Registered 3 Registration denied

Read a Text Message

AT+SBDRT

Remove Flow Control

AT&K0

Stock text message in buffer

AT+SBDWT=Hello World

Short Burst Data: Status

AT+SBDS
like +SBDS: 1, 33, 0, -1
<MO flag>, <MOMSN>, <MT flag>, <MTMSN>

Short Burst Data: Status Extended

AT+SBDSX
- like +SBDSX: 1, 33, 0, -1, 0, 0
<MO flag>, <MOMSN>, <MT flag>, <MTMSN>, <RING Alert flag>, <msg waiting>

Trafic Management status

AT+SBDLOE

like +SBDLOE:0,0

Short Burst Data: Gateway

+SBDGW
EMSS ou non EMSS

Lock status

AT+CULK?

Initiate connection to satellite

AT+SBDI

Initiate connection and transfer either way

AT+SBDIX

RING mode query

AT+SBDMTA?

RING set mode

AT+SBDMTA=0 off
AT+SBDMTA=1 on

Ring status

AT+CRIS
Answer is like +CRIS:000,000 (phone/fax,SBD) See down bellow a better way to use RING.

RING status extended

AT+CRISX
Answer is like +CRISX:000,000,00000000 (phone/fax,SBD,timestamp)

MT and how to use RING

AT+SBDSX gives if RING Alert is set because MT message(s) is waiting
If any, transfer it from space to MT Buffer with AT+SBDIX (todo test if mt queued is valid in modem answer). RING will be set to 0 even if more messages are waiting.
Read it from MT buffer and ask AT+SBDSX for waiting messages.
If any : loop ask for transfer, read from MT buffer.

Rockblock +

IP 68 / 9-30V. You need :

USB <-> serial DB9 adapter like a "Ugreen 2M USB 2.0 to Serial RS232 DB9 9Pin PL2303 Cable Adapter Converter".

@@ Line 21: / Line 21: @@
 AT+SBDWT=Hello<br />
 AT+SBDIX<br />
-== MT and how to use RING ==
-After registration :
-* AT+SBDSX gives if the RING is set, but the number of waiting messages are unknown
-* With a SBDI command, one can get the first waiting message transfered from space to MT buffer and will set the RING to 0
-* The message text in MT buffer can be read with AT+SBDRT
-* A new AT+SBDSX gives the number of still waiting messages. If any, again : ask for transfer in MT buffer and read it.
 == Get Signal get 0-5 (rssi) ==
@@ Line 60: / Line 51: @@
 AT-MSGEO<br />
 Answer is like -MSGEO: 4208,168,4772,2fa14b4d
-== RING mode query ==
-AT+SBDMTA?
-== RING set mode ==
-AT+SBDMTA=0 off
-AT+SBDMTA=1 on
-== Ring status ==
-AT+CRIS<br />
-Answer is like +CRIS:000,000 (phone/fax,SBD)
-See down bellow a better way to use RING.
-==RING status extended ==
-AT+CRISX<br />
-Answer is like +CRISX:000,000,00000000 (phone/fax,SBD,timestamp)
 == Registration status ==
@@ Line 103: / Line 72: @@
 == Short Burst Data: Status ==
 AT+SBDS<br />
-like +SBDS: 1, 33, 0, -1
+like +SBDS: 1, 33, 0, -1 <br />
+<MO flag>, <MOMSN>, <MT flag>, <MTMSN>
 == Short Burst Data: Status Extended ==
-AT+SBDSX<br />  - like +SBDSX: 1, 33, 0, -1, 0, 0
+AT+SBDSX<br />  - like +SBDSX: 1, 33, 0, -1, 0, 0<br />
+<MO flag>, <MOMSN>, <MT flag>, <MTMSN>, <RING Alert flag>, <msg waiting>
 == Trafic Management status ==
@@ Line 124: / Line 95: @@
 AT+SBDI<br />
- +SBDI:<MO status>,<MOMSN>,<MT status>,<MTMSN>,<MT length>,<MT queued>
+<MO status>,<MOMSN>,<MT status>,<MTMSN>,<MT length>,<MT queued>
 == Initiate connection and transfer either way ==
 AT+SBDIX<br />
+<MO status>,<MOMSN>,<MT status>,<MTMSN>,<MT length>,<MT queued>
+== RING mode query ==
+AT+SBDMTA?
+== RING set mode ==
+AT+SBDMTA=0 off<br />
+AT+SBDMTA=1 on
+== Ring status ==
+AT+CRIS<br />
+Answer is like +CRIS:000,000 (phone/fax,SBD)
+See down bellow a better way to use RING.
+==RING status extended ==
+AT+CRISX<br />
+Answer is like +CRISX:000,000,00000000 (phone/fax,SBD,timestamp)
+== MT and how to use RING ==
+* AT+SBDSX gives if RING Alert is set because MT message(s) is waiting
+* If any, transfer it from space to MT Buffer with AT+SBDIX (todo test if mt queued is valid in modem answer). RING will be set to 0 even if more messages are waiting.
+* Read it from MT buffer and ask AT+SBDSX for waiting messages.
+* If any : loop ask for transfer, read from MT buffer.
 = Rockblock + =

Difference between revisions of "Raw sat"