Difference between revisions of "Arduino screen"
From Tmplab
Samneurohack (talk | contribs) |
Samneurohack (talk | contribs) (→Sketch) |
||
| Line 29: | Line 29: | ||
A basic sketch to display strings array and a pin value is available. | A basic sketch to display strings array and a pin value is available. | ||
| − | Ask contact at tmplab.org | + | Ask contact at tmplab.org if it's not available soon on [https://github.com/tmplab git] |
Revision as of 21:54, 30 January 2016
Easy Arduino TFT screen
Hardware
- you want to display some data/state of your arduino
- If you're fed up or can't use the serial line
Try the very cheap tft screen for arduino.
Pictures+Library u8glib on github
It can be as low as 4 pin to connect in i2c :
- VCC (5V)
- GND
- SCL (a clock) goes by default to arduino A5
- SDA for data goes by default to arduino A4
Software
If you use the 4 pin display and u8glib, the line you need to remove comment (// at the beginning )is :
U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NO_ACK); // Display which does not send AC
See u8glib examples sketch.
Sketch
A basic sketch to display strings array and a pin value is available. Ask contact at tmplab.org if it's not available soon on git
