Difference between revisions of "Tinc"
From Tmplab
Samneurohack (talk | contribs) (→tinc.conf for client1) |
Samneurohack (talk | contribs) (→Keygeneration) |
||
| Line 42: | Line 42: | ||
* private key goes to /etc/tinc/networkname | * private key goes to /etc/tinc/networkname | ||
* public key goes to /etc/tinc/networkname/hosts | * public key goes to /etc/tinc/networkname/hosts | ||
| − | * add the first two lines as shown below according to client or server | + | * add the first two lines as shown below according to client or server function |
== hosts/client1 == | == hosts/client1 == | ||
Revision as of 10:14, 25 May 2016
Contents
Linux style Basic tinc-vpn setup
All Nodes Configuration Directory Structure
/etc/tinc/
nets.boot
networkname/
tinc.conf
tinc-up
tinc-down
hosts/
client1
client2
...
tincserver
nets.boot
networkname
tinc.conf for client1
Name=client1 Device=/dev/net/tun ConnectTo=tincserver AddressFamily = ipv4
tinc-up for client1
#!/bin/bash ifconfig $INTERFACE 192.168.22.1 netmask 255.255.255.0
tinc-down for client1
#!/bin/bash ifconfig $INTERFACE down
Keygeneration
- to be run for each client
- tincd -n networkname -K4096
- private key goes to /etc/tinc/networkname
- public key goes to /etc/tinc/networkname/hosts
- add the first two lines as shown below according to client or server function
hosts/client1
Name=client1 Subnet=192.168.22.1 -----BEGIN RSA PUBLIC KEY----- .... -----END RSA PUBLIC KEY-----
hosts/client2
Name=client2 Subnet=192.168.22.2 -----BEGIN RSA PUBLIC KEY----- .... -----END RSA PUBLIC KEY-----
hosts/tincserver
Subnet=192.168.22.254 Address=SERVERPUBLICIP
